4x4 parts
What all parts do I need to make a 2×4 truck 4×4?

The truck is a 1992 dodge cummins w250. List the parts needed please and thankyou for helping

To change a truck into a 4 wheel drive, you will need to change the entire front end, add a transfer case, replace the drive shaft and make sure that the gear ratio in the front and rear matches.

The cost of such a conversion, especially if you are buying the parts individually, is going to greatly exceed the value of the finished truck, or the cost of purchasing a 4X4 truck to replace yours.

Don’s Service Center And 4×4 Parts And Accessories Inc – North Adams, MA


4X4

4X4


$10.13


4X4

4x4

4×4


$7.99


4×4

HighRock 4x4? SlideAway by Bestop

HighRock 4×4? SlideAway by Bestop


$316.99


1997-06 TJ Wrangler, Rubicon and Unlimited;Constructed from 2.5 stainless steel tubing;300lb. capacity;No drill application;Dual purpose storage and step unit;Fits HighRock 4×4 rear bumper as well as the factory original;Optional tray bracket (sold separately) for Jeep

Muffler Shield by Rock Hard 4x4

Muffler Shield by Rock Hard 4×4


$139.99


2007-09 JK Wrangler, Rubicon and Unlimited;2 and 4 door models;Gloss black powder coat;1/4" steel plate;Fastens to Rockhard 4×4 JK rear bumper for Jeep

Front Bumper by Rock Hard 4x4

Front Bumper by Rock Hard 4×4


$379.99


1984-01 XJ Cherokee;Made out of 3/16" x 2" x 4" thick tubing in the center and with outter edges that are made of 1/4" plate:Comes pre-drilled to accept a bolt on winch plate made by Rock Hard 4×4 Parts;Comes with (2)-5/8" x 2-1/2 bolts;Uses factory bumper hardware for installtion for Jeep

HighRock 4x4? Tubular Grille Guard by Bestop

HighRock 4×4? Tubular Grille Guard by Bestop


$122.99


Fits HighRock 4×4 front bumpers 42910;Stainless steel;Protects both the Grille and headlights;Features light tabs for mounting off road lights for Jeep

Front Bumper Steering Box Skid Plate Protector by Rock Hard 4x4

Front Bumper Steering Box Skid Plate Protector by Rock Hard 4×4


$39.99


1976-06 Wrangler and CJ;Gloss black powder coat;Works with Rock Hard 4×4 front bumpers for Jeep

HighRock 4x4? 2" Approach/Departure Roller by Bestop

HighRock 4×4? 2" Approach/Departure Roller by Bestop


$88.99


Fits HighRock 4×4 front and rear bumpers 42901,42903,42908,42910 and 42911;Rubberized textured black finish;Increases ability to get over the toughest obstacles for Jeep

Overhead Shelf by Misch 4x4

Overhead Shelf by Misch 4×4


$149.99


2007-09 JK Wrangler, Rubicon and Unlimited;Black powdercoat;14 gauge steel;Attaches to the top of the windshield frame and the side sport bars;Shelf is lined with black fabric and edge molding;Includes all mounting hardware for Jeep




Related Blogs