chevy 4x4 parts
any one who has a 94 chevy S10 blazer 4X4 know if there is any major parts blocking the starter or is it easy?

I need help changing my starter

It’s really not that hard. First thing you need to do is disconnect the battery (so you dont get shocked!!) There are two 15mm bolts you have to take off. Then take off the dust cover bolts. The dust cover is that big shield that covers up your flywheel and move the dust cover over to the side. Most of the time you can move the starter around enough so you can get the two nuts on the starter solenoid loose. Pull the two wires off of the starter solenoid. If you can’t get the starter out of there still (most of the time you can) you will have to take off the exahust nuts on each side. There will be either two or three nuts on each side holding the exahust pipe to the manifold. Spray some W-D40 on them because they will probably be rusty. If they feel like they won’t turn and you think you might break off one of the exauhst studs you will need to use a torch and heat up the nuts (a torch always works best) then twist them off. Anyway bring the exauhst down just far enough to make the dust cover go down a little farther so you can wiggle your starter out of there. It is kind of hard explaining how to work on something when you are typing out the instructions but I did the best I could. All else fails go and buy a chilton’s manual they have picture illustrations that show how to do it on alot of repairs.

4×4 Chevy Race Truck Mudding in The Side Yard


4x4

4×4


$7.99


4×4

4X4

4X4


$10.13


4X4

HighRock 4x4? SlideAway by Bestop

HighRock 4×4? SlideAway by Bestop


$316.99


1997-06 TJ Wrangler, Rubicon and Unlimited;Constructed from 2.5 stainless steel tubing;300lb. capacity;No drill application;Dual purpose storage and step unit;Fits HighRock 4×4 rear bumper as well as the factory original;Optional tray bracket (sold separately) for Jeep

Muffler Shield by Rock Hard 4x4

Muffler Shield by Rock Hard 4×4


$139.99


2007-09 JK Wrangler, Rubicon and Unlimited;2 and 4 door models;Gloss black powder coat;1/4" steel plate;Fastens to Rockhard 4×4 JK rear bumper for Jeep

Front Bumper by Rock Hard 4x4

Front Bumper by Rock Hard 4×4


$379.99


1984-01 XJ Cherokee;Made out of 3/16" x 2" x 4" thick tubing in the center and with outter edges that are made of 1/4" plate:Comes pre-drilled to accept a bolt on winch plate made by Rock Hard 4×4 Parts;Comes with (2)-5/8" x 2-1/2 bolts;Uses factory bumper hardware for installtion for Jeep

HighRock 4x4? Tubular Grille Guard by Bestop

HighRock 4×4? Tubular Grille Guard by Bestop


$122.99


Fits HighRock 4×4 front bumpers 42910;Stainless steel;Protects both the Grille and headlights;Features light tabs for mounting off road lights for Jeep

Front Bumper Steering Box Skid Plate Protector by Rock Hard 4x4

Front Bumper Steering Box Skid Plate Protector by Rock Hard 4×4


$39.99


1976-06 Wrangler and CJ;Gloss black powder coat;Works with Rock Hard 4×4 front bumpers for Jeep

HighRock 4x4? 2" Approach/Departure Roller by Bestop

HighRock 4×4? 2" Approach/Departure Roller by Bestop


$88.99


Fits HighRock 4×4 front and rear bumpers 42901,42903,42908,42910 and 42911;Rubberized textured black finish;Increases ability to get over the toughest obstacles for Jeep

Overhead Shelf by Misch 4x4

Overhead Shelf by Misch 4×4


$149.99


2007-09 JK Wrangler, Rubicon and Unlimited;Black powdercoat;14 gauge steel;Attaches to the top of the windshield frame and the side sport bars;Shelf is lined with black fabric and edge molding;Includes all mounting hardware for Jeep




Related Blogs