chevy 4x4 parts
Chevy Truck Parts that will interchange?

What parts from a 1988 chevy 4×4 will work on a 1996 chevy 4×4? Were stripping the 88 down and wondering what all to keep.

I’m a mechanic, I own a Chevy pick up, and that is a tough question even for me. The best thing to do is just keep the “88″ and when you need a part, you’ll have it. There are so many parts that will work, it is difficult to tell what to keep, and what not to keep. One way to look at it is; take all the parts that are likely to give trouble, and the ones that are the most expensive to purchase, and keep those. Example: The Radiator, engine, transmission, four wheel drive unit, drive shafts, master cylinder, brake booster, Exhaust system, rear end, battery, seat (if its better than the one you have), heater core, computer (if they are the same) any and all sensors, windows & cranks, and any sheet metal that you might could use. That about covers it. I would look at parts that get used a lot, and are likely to wear out as ones to consider keeping.
Glad I could help. Good Luck!!!

1981 Chevy Luv Diesel 4X4 Part 1


4X4

4X4


$10.13


4X4

4x4

4×4


$7.99


4×4

HighRock 4x4? SlideAway by Bestop

HighRock 4×4? SlideAway by Bestop


$316.99


1997-06 TJ Wrangler, Rubicon and Unlimited;Constructed from 2.5 stainless steel tubing;300lb. capacity;No drill application;Dual purpose storage and step unit;Fits HighRock 4×4 rear bumper as well as the factory original;Optional tray bracket (sold separately) for Jeep

Muffler Shield by Rock Hard 4x4

Muffler Shield by Rock Hard 4×4


$139.99


2007-09 JK Wrangler, Rubicon and Unlimited;2 and 4 door models;Gloss black powder coat;1/4" steel plate;Fastens to Rockhard 4×4 JK rear bumper for Jeep

Front Bumper by Rock Hard 4x4

Front Bumper by Rock Hard 4×4


$379.99


1984-01 XJ Cherokee;Made out of 3/16" x 2" x 4" thick tubing in the center and with outter edges that are made of 1/4" plate:Comes pre-drilled to accept a bolt on winch plate made by Rock Hard 4×4 Parts;Comes with (2)-5/8" x 2-1/2 bolts;Uses factory bumper hardware for installtion for Jeep

HighRock 4x4? Tubular Grille Guard by Bestop

HighRock 4×4? Tubular Grille Guard by Bestop


$122.99


Fits HighRock 4×4 front bumpers 42910;Stainless steel;Protects both the Grille and headlights;Features light tabs for mounting off road lights for Jeep

Front Bumper Steering Box Skid Plate Protector by Rock Hard 4x4

Front Bumper Steering Box Skid Plate Protector by Rock Hard 4×4


$39.99


1976-06 Wrangler and CJ;Gloss black powder coat;Works with Rock Hard 4×4 front bumpers for Jeep

HighRock 4x4? 2" Approach/Departure Roller by Bestop

HighRock 4×4? 2" Approach/Departure Roller by Bestop


$88.99


Fits HighRock 4×4 front and rear bumpers 42901,42903,42908,42910 and 42911;Rubberized textured black finish;Increases ability to get over the toughest obstacles for Jeep

Overhead Shelf by Misch 4x4

Overhead Shelf by Misch 4×4


$149.99


2007-09 JK Wrangler, Rubicon and Unlimited;Black powdercoat;14 gauge steel;Attaches to the top of the windshield frame and the side sport bars;Shelf is lined with black fabric and edge molding;Includes all mounting hardware for Jeep




Related Blogs